Seon Mobile Surveillance Explorer EX4 Plus 35 System, Инструкция по установке и эксплуатации

Страница: 21 / 100

Introduction
700-0058 R001 1–7
1.4. Lock Box
The lock box secures the DVR into a location on the bus and provides the
following features:
• A locking door which prevents unauthorized access to the DVR controls.
Authorized personnel can use the lock box key to remove the hinged locking
door when access to the DVR is necessary.
• A sliding rail system which allows for easy DVR installation and exchange.
• A slotted cable entry allows connectors to be inserted into the lock box after
installation.
• A removable, hinged locking door, rounded to prevent injury from sharp
edges.
• Mounting patterns that can accommodate installation flat on the floor,
vertically on the floor, or under a seat. (For installing the DVR under a seat,
use of the Underseat Mounting Bracket Kit is recommended. For installing
the DVR in a vertical mount, the Vertical Mounting Bracket Kit is
recommended. Contact your sales representative at Seon Design for more
information.)
1.5. Cables and Harnesses
The wiring connections to the EX4 Plus 35 System includes:
• A camera cable comes with the camera, using a single connector for ease of
installation.
• An ignition input harness.
• A high-reliability power harness for providing power to the DVR.
• A driver’s indicator panel to allow easy event searching on the DVR.
• In-line fuses on the power and ignition lines for added protection.