Sentry360 IS-BL800, Руководство пользователя

Страница: 7 / 17

1.5 microSD Card Slot / Default Button
The camera’s microSD card slot and factory default button are located inside the front housing.
If users need to use them, the front housing must be opened. Follow the steps below to reach
microSD card slot and factory default button.
Step 1: Loosen the screw on the camera housing but do not
detach it. Then separate the front housing from the camera.
Step 2: The positions of microSD card slot and default button are as shown below.
NOTE: It is not recommend to record with the microSD card for 24/7 continuously, as it
may not be able to support long term continuous data read/write. Please contact the
manufacturer of the microSD card for information regarding the reliability and life
expectancy.
Step 3: Install the front housing to the camera, and tighten the screw on the camera housing.