16
Press the [ # ]
[ # ]
[ # ]
[ # ]
[ # ] key, the display will then show the sub group item for
item 66 - the user codes available, in this case user number 1.
User Code #1
:_
The system will display the third programming level, as indicated by
the cursor located in the data field. To access level 2 programming,
press the [ * ]
[ * ]
[ * ]
[ * ]
[ * ] key. The cursor will move to the sub group item number
field.
User Code #1
:
You may now move within the sub group item field. Example: Using
item 66 - Pass Codes above, the sub group items displayed are the
individual user codes. Currently user #1 is being displayed. To view
user 12 pass code, press: [ 1 ] [ 2 ] [ # ].
The display will then read the following:
User #12
:_
The display will show the contents of the selected sub group item in
this case user #12's pass code.
6.4
6.4
6.4
6.4
6.4
LEVEL 3 DATA PROGRAMMING
LEVEL 3 DATA PROGRAMMING
LEVEL 3 DATA PROGRAMMING
LEVEL 3 DATA PROGRAMMING
LEVEL 3 DATA PROGRAMMING
This level identifies the actual data of the selected program item or
sub group item.
EXAMPLE:
EXAMPLE:
EXAMPLE:
EXAMPLE:
EXAMPLE:
Item 1 phone number has been selected.
The display will read the following:
Enter Prog #1
Phone
Pressing the [ # ]
[ # ]
[ # ]
[ # ]
[ # ] key, the display will show the number programmed
for telephone number 1. Since no telephone number was previously
entered, the data field will appear blank.
Phone #1:_
The cursor will appear in the data field.
The [LEFT]
[LEFT]
[LEFT]
[LEFT]
[LEFT] and [RIGHT]
[RIGHT]
[RIGHT]
[RIGHT]
[RIGHT] arrow keys are used for cursor movement
on the data display line. If data is currently displayed, the new data
can be re-written right on top of the old data. However, if clearing
the line is necessary, do so using the clear line key combination.
IT IS STR
IT IS STR
IT IS STR
IT IS STR
IT IS STRONGL
ONGL
ONGL
ONGL
ONGLY RECOMMENDED
Y RECOMMENDED
Y RECOMMENDED
Y RECOMMENDED
Y RECOMMENDED THA
THA
THA
THA
THAT
T
T
T
T THE DEFINITION
THE DEFINITION
THE DEFINITION
THE DEFINITION
THE DEFINITION
SECTION OF
SECTION OF
SECTION OF
SECTION OF
SECTION OF THE PR
THE PR
THE PR
THE PR
THE PROGRAMMING INSTR
OGRAMMING INSTR
OGRAMMING INSTR
OGRAMMING INSTR
OGRAMMING INSTRUCTIONS BE READ
UCTIONS BE READ
UCTIONS BE READ
UCTIONS BE READ
UCTIONS BE READ
BEFORE A
BEFORE A
BEFORE A
BEFORE A
BEFORE ATTEMPTING
TTEMPTING
TTEMPTING
TTEMPTING
TTEMPTING T
T
T
T
TO PR
O PR
O PR
O PR
O PROGRAM
OGRAM
OGRAM
OGRAM
OGRAM THE SYSTEM.
THE SYSTEM.
THE SYSTEM.
THE SYSTEM.
THE SYSTEM.
SECTION 6.0: PROGRAMMING INSTRUCTIONS
6.1
6.1
6.1
6.1
6.1
PROGRAMMING MODE
PROGRAMMING MODE
PROGRAMMING MODE
PROGRAMMING MODE
PROGRAMMING MODE
The SC system must be placed into the programming mode before
any programming can begin. See "Keypad Programming" for
instructions on entering the Installer Keypad Programming mode.
Upon successful entry into the Programming mode the display
should read the following:
Enter Prog #1
Phone
When programming the SC800/1600 system, there are three (3)
programming levels available.
6.2
6.2
6.2
6.2
6.2
LEVEL 1 - MAIN ITEM GROUP PROGRAMMING
LEVEL 1 - MAIN ITEM GROUP PROGRAMMING
LEVEL 1 - MAIN ITEM GROUP PROGRAMMING
LEVEL 1 - MAIN ITEM GROUP PROGRAMMING
LEVEL 1 - MAIN ITEM GROUP PROGRAMMING
This level identifies which programming item has been selected with
its associated item number.
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE:::::
Enter Prog #1
Phone
The example shows that programming item 1 phone number has
been selected.
In this programming level, the cursor or prompt appears for the
programming item number entry. The [up arr
[up arr
[up arr
[up arr
[up arro
o
o
o
ow]
w]
w]
w]
w] and [do
[do
[do
[do
[down arr
wn arr
wn arr
wn arr
wn arro
o
o
o
ow]
w]
w]
w]
w]
keys are used to scroll back and forth through the menu displaying
the item numbers and their associated item descriptions.
A program item may be directly accessed by entering its program-
ming number, then pressing the [ # ]
[ # ]
[ # ]
[ # ]
[ # ] key.
6.3
6.3
6.3
6.3
6.3
LEVEL 2 SUB GROUP ITEM PROGRAMMING
LEVEL 2 SUB GROUP ITEM PROGRAMMING
LEVEL 2 SUB GROUP ITEM PROGRAMMING
LEVEL 2 SUB GROUP ITEM PROGRAMMING
LEVEL 2 SUB GROUP ITEM PROGRAMMING
This level allows movement within the selected sub group item. Sub
group item contents reflect options of the main group programming
items.
EXAMPLE:
EXAMPLE:
EXAMPLE:
EXAMPLE:
EXAMPLE:
Main program item 66 - user codes has been selected.
The display will show the following:
Enter Prog #66
User Code
