background image

 

How to Use a Power Paddle 

Introduction 

The power paddle provides a temporary power source to the NXT 
and NXT Wireless (blue) series lockboxes. If the internal batteries in 
the lockbox are dead, you will need a temporary power source to 
allow you to open the key compartment and replace the internal 
lockbox batteries. 
 

Note

: It is important to read through these directions before 

you use the power paddle at a lockbox. 

 
To determine if the lockbox batteries are dead, insert your 
SentriCard® into the lockbox and press the lockbox keypad buttons. 
If the lights on the lockbox do not illuminate and the lockbox does 
not make any sounds, the batteries are dead. 
 

Note

: Before the lockbox batteries die, the lockbox will alert 

you. When you insert your SentriCard® into the lockbox, 
followed by entering your PIN, the lockbox will illuminate 
the 

MESSAGE

 light. The 

MESSAGE 

light indicates it is time to 

replace the lockbox batteries. Once the 

MESSAGE

 light 

illuminates, you will have a couple of weeks (depending 
upon lockbox usage) to replace the lockbox batteries. When 
the 

MESSAGE

 light illuminates SentriLock recommends 

replacing the lockbox batteries as soon as possible.  

 

Before Using the Power Paddle at a Lockbox 

Before you can use the power paddle at a lockbox, you need to apply a time stamp file to your 
SentriCard®. This time file allows the power paddle to set the lockbox’s internal clock, while providing 
temporary power to the lockbox.  If you have the 

SentriCard® Utility 3.x

, you can apply the time file to 

your SentriCard® yourself. In order to apply a time file to a SentriCard® using the 

SentriCard® Utility 3.x

use the following steps: 
 

1.

 

Insert your SentriCard® into the SentriCard® Reader. 

2.

 

After your SentriLock ID automatically fills in, enter your password and click the 

Click to Login

 

button. 

3.

 

On the left-hand side of the 

Main Menu

, click the 

Set Lockbox Clock

 button. 

4.

 

Click the 

Select

 button to select the lockbox serial number. 

5.

 

Choose the date of when you will be going to the lockbox with your SentriCard® and the power 
paddle. 

Отзывы: