Sentera Controls FCMF R Series, Монтаж и эксплуатация

Страница: 5 / 10

www.sentera.eu
MIW-FCMFX-R-EN-000 - 29 / 05 / 2021 5 - 10
back to the table of contents
FCMFX-R
INTELLIGENT CO
2
SENSOR
Part 1: General requirements
■
EMC Directive 2014/30/EC:
►
EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
► EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic
standards - Immunity for residential, commercial and light industrial environments
► EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for residential, commercial and light-industrial
environments Amendments A1:2011 and AC:2012 to EN 61000-6-3
► EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1: General requirements
► EN 61326-2-3:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 2-3: Particular requirements - Test
configuration, operational conditions and performance criteria
■
WEEE 2012/19/EC
■
RoHs Directive 2011/65/EC
OPERATIONAL DIAGRAMS
AO1, max
range
AO1, min
range
60
40
100
0
rH Min range
0
0
0 CO
2
Min range
CO
2
Max range
Max
Min
T Min range
T Max range
rH Max range
AO1 [%]
50
100
2.000
rH [%] T [°C]
CO
2
[ppm]
CAUTION
The output changes automatically depending on the highest of the T, rH or CO
2
values, i.e. the highest of the three output values controls the output. See the
green line in the operational diagram above. One or multiple sensors can be
deactivated. E.g. it is also possible to control the output based on the measured
CO
2
level only.
10
20
30
40
50
60
70
80
90
100
Minimum
range
Minimum
alert
Maximum
alert
Output [%]
T [°C] / rH [%] / CO
2
[ppm] *
Maximum
range