Sensus AR5000, Руководство пользователя

Страница: 76 / 86

3–20 Sensus Metering Systems
Chapter 3: Find Route Information
4
Press the ENTER key.
No Matches Found Message
The system displays the results of the search.
• If the system cannot find the information you entered,
then the screen displays a No Matches Found message.
Press the Esc key to clear the No Matches Found
message and end the search.
• If the system finds more than one match for the
information you entered, the screen displays the first
match, along with the following choices:
Search Results Screen
Stop here - Press the ENTER key to stop the search on
the displayed location.
Next Location - Press the TAB> key and the system
displays the next location in the search results.
You can use the TAB> key to scroll through the entire
list of search results. Once you reach the end of the
search results, the system displays a No More Matches
Found message.
No More Matches Found
Message
Press the Esc key to clear the No More Matches Found
message and end the search.
Â
Find Limit Violators
The office staff typically configures high/low limits for the
readings from each meter along the route. This assigns a
range of acceptable readings for each location. As you are
reading meters, you may encounter readings that do not fall
within the preset limits. If a reading does not fall within this
range, the AR5000 sounds an audible warning and displays
the Limit Check screen (see
Enter Data
on page 2-14/
Enter
Manual Readings
on page 2-14). At any time during the
reading process, you can review a list of the violators.