Digital I/O adapters
Senstar 100 Installation guide • • • 2 - 23
Optically isolated input card kits
The digital input cards provide 16 optically isolated I/Ps per card, for connecting
auxiliary devices to the Senstar 100 CU. The I/Ps are grouped into two 8-bit
parallel I/P ports. Each port bit corresponds to an optically isolated input on the
card. The default input logic is OFF for a non-alarm state (the Opto-LED is OFF).
This setting can be changed, on a point per point basis, in the site database using
the Site Creation utility.
Features
PCI-16REL Features
•
provides discrete access to 16 output point relays
•
highly-reliable 10 VA reed relays
•
normally open (N.O.) form 1B relays
•
PCI 2.1 bus compliant Plug and Play adapter
•
breakout box for interconnect wiring
•
FCC, UL, CE certified
PCI-32REL-B Features
•
provides discrete access to 32 output point relays
•
highly-reliable 10 VA reed relays
•
normally open (N.O.) form 1B relays
•
PCI 2.1 bus compliant Plug and Play adapter
•
breakout box for interconnect wiring
•
FCC, CE certified
PCI-16ISO Features
•
16 optically isolated inputs
•
PCI 2.1 bus compliant Plug and Play adapter
•
breakout box for interconnect wiring
•
FCC, CE certified