manualshive.com logo in svg

Sensotec SC1000, Руководство пользователя, Страница: 61 / 62

Поделиться
Скачать
Sensotec SC1000 Скачать руководство пользователя страница 61

 

        Additional Channels for SC Series Instrumentation     page 61

WARRA

NT
Y

/R

E

P

A

IR P

O

L

ICY

W a rra n ty /R e p a ir  P o lic y

Limitation of Remedy and

Disclaimer of Warranty

Any of our products which, under normal operating conditions, proves defective in
material or in workmanship within one year from the date of shipment by Senso-
tec, Inc., will be repaired or replaced free of charge, provided that the buyer (1)
promptly notifies Sensotec, Inc. of any such defect; (2) provides Sensotec, Inc.
with satisfactory proof of the defect and that the product was properly installed,
maintained, and operated within the limits of rated and normal usage; and (3)
obtains from Sensotec, Inc. authorization to return the product. Any such product
shall be returned with transportation charges prepaid. The replacement product
will be shipped F.O.B. our plant.

The remedy set forth herein does not extend to any product or part thereof which,
under normal usage, has an inherently shorter useful life than one year. The rem-
edy set forth herein does not apply to damage or to defects in any product caused
by the buyer’s misuse or neglect, nor does it apply to any product which has been
repaired or disassembled which, in the sole judgement of Sensotec, Inc. affects
the performance of the product.

The remedy set forth herein is the buyer's exclusive remedy, and will satisfy all
obligations of Sensotec, Inc. whether based on contract, negligence, or otherwise.
Sensotec, Inc. is not responsible for any incidental or consequential loss or dam-
age which might result from a failure of any Sensotec, Inc. product. 

THIS EXPRESS WARRANTY IS MADE IN LIEU OF ANY AND ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.

Obtaining Service Under

Warranty

Advanced authorization is required prior to the return to Sensotec, Inc. Before
returning the items, either write to the Repair Department c/o Sensotec, Inc., 2080
Arlingate Lane, Columbus, Ohio 43228, or call (800) 848-6564 with: 1) a part
number; 2) a serial number of the defective product; 3) a technical description* of
the defect; 4) a no-charge purchase order number (so products can be returned to
you correctly); and 5) ship and bill addresses. Shipment to Sensotec, Inc. shall be
at Buyer's expense and repaired or replacement items will be shipped F.O.B. our
plant in Columbus, Ohio. Non-verified problems or defects may be subject to an
evaluation charge. Please return the original calibration data with the unit.

Obtaining Non-warranty

Service

Advance authorization is required prior to the return to Sensotec, Inc. Before
returning the item, either write to the Repair Department c/o Sensotec, Inc., 2080
Arlingate Lane, Columbus, Ohio 43228, or call (800) 848-6564 with: 1) a part
number; 2) a serial number of the defective product; 3) a technical description* of
the malfunction; 4) a purchase order number to cover Sensotec, Inc.'s repair cost;
and 5) ship and bill addresses. After the product is evaluated by Sensotec, Inc.,
we will contact you to provide the estimated repair costs before proceeding.  The
minimum evaluation charge is $95. Shipment to Sensotec, Inc. shall be at Buyer's
expense and repaired items will be shipped to you F.O.B., our plant in Columbus,
Ohio. Please return the original calibration data with the unit.

Repair Warranty

All repairs of Sensotec, Inc. products are warranted for a period of 90 days from
date of shipment. This warranty applies only to those items which were found
defective and repaired. It does not apply to products in which no defect was found
and returned as is or merely re-calibrated. Out of warranty products may not be
capable of being returned to the exact original specifications or dimensions.

*Technical description of the defect: In order to properly repair a product, it is necessary for
Sensotec, Inc. to receive information specifying the reason the product is being returned.
Specific test data, written observations on the failure and specific corrective action you
require is needed.

Содержание SC1000































































Отзывы:

Нет отзывов