Sensory Analytics Specmetrix SA Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 63

Sensory Analytics Specmetrix SA Скачать руководство пользователя страница 35

35 |

P a g e

R e v 5 - 1 9

the account who’s Plant ID = 0). This level of access does however possess the ability to

add/modify/remove ANY user, regardless of the assigned plant, whose credentials are

‘Corporate’ or less.

•

Corporate Admin

– This is the highest-level user on the system, but still has restrictions on some

aspects of the recipe editor. First, this is the minimum level user that is required to add, modify

or inactivate a [Plant]. Corporate Admins can view all plant recipes but can only make

modifications to the ‘Corporate plant’ recipes and lanes. This level of access does however

possess the ability to add/modify/remove ANY user, regardless of the assigned Plant.

•

Support

– This level of access is strictly limited Sensory Analytics Technical personnel.

*

Note

: Login name is a unique field. If a login name already exists on the system (regardless of visibility

in the editor) then you will need to select a different name as there cannot be 2 logins with the same
name.

Plants

Plant Viewer (Corporate)

For almost all systems installed in the field the recipe database will reside locally on the

SpecMetrix

®

unit. This is also the recommendation of Sensory Analytics. When this is the case, then there is only one

plant, and it will be the ‘Corporate’ plant.

* The corporate plant cannot be deactivated

.

«
...
33
34
35
36
37
...
»

Содержание Specmetrix SA
































































Отзывы:

Нет отзывов