Sensory Analytics Specmetrix SA Скачать руководство пользователя страница 10

Страница: 10 / 63

10 |

P a g e

R e v 5 - 1 9

Electronics Mounting and Conduit Work

An on-site maintenance technician needs to be available to work with SA personnel to mount the probe

holder fixtures to the equipment frame. These attachments will vary depending on the type of system

purchased, and machine configuration.

The control Unit will require four 3/8” holes on a 20” x 20” area to mount.

The

SpecMetrix®

Display Unit can either be mounted to a supplied pedestal frame or a supplied swing-

arm mount system.

Sensory Analytics will supply the flexible conduit to be installed between the probes and Control Unit,

with the customer providing the means to tie or clamp the conduit down.

The customer is expected to supply and install conduit for an Ethernet connection between the Display

Unit and the Control Unit, and from the Control Unit to the customer’s network if external data storage

is required.

Must use minimum CAT 6 Shielded Cable

SA will supply, install and terminate the Ethernet cable unless agreed otherwise with plant personnel.

The probes are optical devices with no electrical connections and so can be mounted in an explosive

environment. The Control Unit, however, contains electrical components and is not designed for use in

an explosive environment. The fiber optic cables have a standard length of 30 feet and can be up to 60

feet long, and so the Control Unit can be mounted up to 50 feet from the probes and production line.

The Display Unit can be mounted up to 150 feet from the Control Unit.

Probe Installation

Typically, Sensory Analytics technicians will install the probes ¾” – 1 ¼” over the web at a 90° angle using

a Hex bar and collar clamps. If a plant has constructed their own mechanism for probe mounting, the

mechanism must allow for probe height adjustment from ½ inch to 2 inches from the web.

Содержание Specmetrix SA
































































Результаты поиска

Содержание Specmetrix SA

Отзывы:

Sensory Analytics Specmetrix SA, Руководство по установке и эксплуатации, Страница: 10 / 63

Результаты поиска

Содержание Specmetrix SA

Отзывы: