background image

SLDY0014W  

 

 

 

Trouble Shooting

 

 

If your solar light does not come on at dusk despite observance of all the instructions, please 
try the following steps: 

 

1)

 

Make sure that the solar light is not being affected by any other light source. 

 

2)

 

Ensure the solar light does not stand in the shade during the day. 

 

3)

 

Make sure the switch is in the auto position. 

 

4)

 

Check that the batteries are installed correctly. 

 

Maintenance

 

 

Clean the solar module regularly with a damp towel to guarantee optimum performance of the 
solar panel. Do not use any type of solvent for cleaning and be careful not to put too much 
pressure on the module while cleaning. 

 

If you need any support please contact: 

[email protected]

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 
 
 
 

 

4 / 4 

www.senslights.com 

Email:

[email protected]

 

Содержание SLDY0014W

Страница 1: ...l 3 5W high efficiency Polycrystalline PV module Battery 1PC Ni Mh 2000mAh batteries maintenance free Controller Intelligent controller light time intelligent control waterproof IP 44 guard level various protections over charge and over discharge protect function Lumen 200lm LED Source 12 pcs 0 2w LEDs high brightness LED LED Type φ 0 3w LED colors white Average Life hrs 35000 Average operation ti...

Страница 2: ...solar panel and generally free from cover and shade When locating a suitable position for the unit remember that it detects an area of about 45 60 degrees vertically and about 90 120 degrees horizontally with a range of over 5 meters 2 The solar light must be left to charge for 2 sunny days before first time use so that best results are achieved Assembly Instructions Lamp installations 1 Choose th...

Страница 3: ...riod your solar lights are ready for use Your light will now function automatically Replacing the Batteries 1 Take off the 4 screws with screwdriver and replace the old Ni Mh batteries Make sure the new batteries are Ni Mh rechargeable batteries 2 Install the new batteries in to the battery compartment ensuring the correct polarity is observed 3 Reassemble the unit by reversing the above procedure...

Страница 4: ...in the shade during the day 3 Make sure the switch is in the auto position 4 Check that the batteries are installed correctly Maintenance Clean the solar module regularly with a damp towel to guarantee optimum performance of the solar panel Do not use any type of solvent for cleaning and be careful not to put too much pressure on the module while cleaning If you need any support please contact sup...

Отзывы: