Components
Tools required
Safety instructions
Important safety instructions
• If in doubt installation must be carried out by a qualified electrician.
• Install on smooth flat surface(s) only.
• Do not exceed or stretch the cable length of each LED wire.
• There are 156 x 0.09W warm white LEDs around this mirror
• (W)500mm x (H)700mm x (D)50mm
• Please make sure the LEDs are working correctly before
commencing installation
Please read these instructions carefully before attempting to install this
product. It is advisable to keep these instructions in a safe place for further
reference.
We recommend that you consult a qualified electrician.
All electrical installations must be carried out in accordance
with current IEE wiring regulations (BS7671).
These products must not be modified. If any modifications are
made, it may invalidate the warranty and may render the product unsafe.
This product should be used indoors.
1 x Vermont LED Mirror
(screw and spacers attached)
1 x instructions
1x Pencil
1x Screw Driver
1. Before commencing installation or maintenance, isolate the main electrical supply for the appropriate circuit at the fuse board.
2. This product is only to be connected to a 240V 50Hz supply.
3. The mirror should be mounted onto a secure surface.
4. When installing please take care to avoid water pipes, joints and electrical cables.
5. The mirror must be installed with a minimum clearance of 150mm between the infrared sensor and any adjacent countertop
or obstruction to ensure correct function of the sensor.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed
out wheelie bin symbol, indicated that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic waste.
1 x VERMONT
LED MIRROR
INSTALLATION
INSTRUCTIONS
IMPORTANT: please read these instructions before commencing installation and retain for future reference.
CODE: SE30776C0