1 x VIVA MULTI LED FLEXIBLE STRIP
Maintenance & Care
• Ensure that the power is disconnected prior to cleaning.
• Wipe over with a dry or slightly damp cloth only.
• Do not use harsh chemical solvents, it may dis-colour or damage the finish.
Sensio, Unit 7, Speedwell Road, Whitwood, Castleford, West Yorkshire, WF10 5PY
www.sensio.co.uk
Installation
1
2
Measure the length of each area to which the strip is
to be installed.
Fittings can be directly interlinked via the male &
female connectors on each fitting. Interlink fittings
to achieve the required length before beginning
installation.
The flexible strip can be cut once. Cut points are
every 50mm along the strip. Re-use a cut section
of the strip ONCE using the mini-cut connector
(SE10318MCC).
3
Connect the last strip in the run to the driver
connection cable (SE10314). Replace the end cap on
the other end of the strip to protect the fitting.
4
Ensure the surface to which the strip is being applied
is clean. Remove the paper protecting the adhesive
on the back of the strip. Position the strip carefully
ensuring it is straight, and only when you are happy
with the position firmly press into place. We suggest
that the strip is not removed and re-applied.
Plug the connector on the end of the cable into the
24V LED driver distribution block. Ensure the wattage
of the LED driver is not exceeded. Finally, connect the
driver to the mains supply.
If hiding driver in cabinet a 6mm hole cut is
required to feed the cable through.
5
6
Accessories
SE10314
2.5M Driver Connection
*This item is required to
run the flexible strip
SE10316
50mm Corner
Connection Lead
Get around 90 degree bend
without breaking the run
of strips running from one
driver connection lead.
Technical drawings are for illustrative purposes only. Sensio has the right to change any information without prior notice.
Make sure you check all hole cut outs before work commences.
The driver connection lead is an essential accessory to power EACH RUN of the flexible LED strip light.
SE10317
1500mm Inter
Connecting Lead
Used to get around
appliances without
breaking the run of strips.
SE10318MCC
Cut Joining
Connecting clip
