Sens EnerGenius 101334, Руководство по установке и эксплуатации

Страница: 48 / 64

SENS EnerGenius® DC Compact Technical Manual
48
2 0x02 AC1 Breaker
The AC breaker is OPEN or has tripped. Only available with Breaker
Status option.
3 0x03 Unused Unused
4 0x04 Unused Unused
5 0x05 DC SPD
The DC supplementary surge protector has expired and needs
replacement.
6 0x06 DC Breaker
The DC breaker is OPEN or has tripped. Only available with Breaker
Status option.
7 0x07 Unused Unused
8 0x08 Unused Unused
9 0x09 Unused Unused
10 0x0A Unused Unused
11 0x0B
System
Display Board This device is configured as a system display board. It will present
information for the entire system, even if devices are not in its unit.
12 0x0C Unused Unused
13 0x0D
Sensbus
Inactive
No other devices are found on SENSBus.
14 0x0E Unused Unused
15 0x0F Unused Unused
16 0x10 Unused Unused
17 0x11 Unused Unused
18 0x12
No Power
Board Data
No module power boards are found on SENSBus.
11.10. Accessory Assigned Channel Alarms Bit Definition
Bit Address
Name Description
Decimal Hex
0 0x00 Invalid Config
The configuration of one or more power modules in the unit is
invalid.
1 0x01 Individual Module Fault A power module in the unit has faulted.
11.11. Writable Control Flags (Coils)
Single coil writes: 0xFF00 for ON, 0x0000 for OFF
Address
Description Details
Decimal Hex
16 0x010 Start/stop manual boost ON to start, OFF to stop
17 0x011 Reset periodic boost charge schedule ON to reset schedule, OFF is no-op
18 0x012 Start/stop battery check ON to start, OFF to stop
19 0x013 Reset periodic battery ON to reset schedule, OFF is no-op
20 0x014 Clear battery check failure ON to reset alarm, OFF is no-op
21 0x015 Not applicable Not applicable
22 0x016 Force DC Startup ON to start, OFF to stop
23 0x017 Reset Latched Alarms ON to reset alarm, OFF is no-op