Minnow 1.0T & Minnow 1.0TH
User Guide
Senonics LLC
www.senonics.com [email protected] [email protected]
Revision 1.0.4
Senonics LLC ©
4/11
3.
USING MINNOW 1.0
Minnow 1.0 logger includes one button:
START button:
When configured for "Button Press" logger start, this
button starts and stops logging. In other
configurations, this button is inactive.
Start/Stop Button
Figure 2: Logger Start/Stop Button
Minnow 1.0 includes two LEDs:
Status LED:
When the logger starts logging then this LED pulses
green
once for 1 second.
When logging this LED flashes
green
for 7
milliseconds and off for 6 seconds.
When the logger stops then this LED pulses
red
for
1 second then off.
Alarm LED:
When a temperature and/or humidity alarm is
triggered this LED flashes
red
for 7 milliseconds and
off for 6 seconds.
Figure 3: LED indicators
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
