Sennheiser VMX 100, Руководство по эксплуатации

Страница: 15 / 27

15
The charging process cannot be started during an ongoing
call. A fully charged battery provides a talk time of up to five
hours or a standby time of up to 100 hours. When the bat-
tery is about to run flat:
•
The LED
쐄
flashes red.
•
Three beeps are heard in the headset every 30 seconds.
•
Less than five minutes of talk time are left.
Switching the headset on/off
f
Open the microphone boom
쐃
.
The headset is switched on. The
LED
쐄
indicates the current op-
erating mode:
•
If the LED
쐄
flashes slowly in
blue, the headset is already
paired to a mobile phone. The
headset is therefore ready to
use.
•
If the LED
쐄
flashes alternatingly in red and blue, the
headset is not yet paired to a mobile phone. Pair it as
described under “Pairing the headset to mobile phones
or other Bluetooth devices” on page 16.
•
If the headset is already paired to a mobile phone and if
there is an incoming call on your mobile phone, the call
is answered immediately by opening the microphone
boom
쐃
without any further action.
쐃