Using the RS 5200’s additional functions
RS 5200 | 31
LED flashes white.
Release the buttons.
Advanced settings
The advanced settings allow you to adjust the wireless headphone
system to your individual needs and to protect the settings against
accidental changes.
Activating the protected settings mode
You can change the advanced settings by activating the protected
settings mode:
1. Disconnect the transmitter from the power supply system by
unplugging the connector of the power supply unit.
2. Keep the Hearing profile button pressed and connect the trans-
mitter to the power supply system by connecting the connector of
the power supply unit to the yellow socket of the transmitter.
The protected settings mode is activated. The
Transmitter status
LED flashes blue. The LED segments indicate the current settings as
specified in the following chapters:
•
battery status display (see page 32)
•
charging reminder function (see page 32)
•
hearing profile and balance protection (see page 33)
Deactivating the protected settings mode and saving the advanced
settings
To save the advanced settings and to deactivate the protected set-
tings mode:
3. Disconnect the transmitter from the power supply system by
unplugging the connector of the power supply unit.
2
3
1
+
ON
+
2
1
1A
1A
