Putting the RS 5200 into operation
10 | RS 5200
Putting the RS 5200 into
operation
Setting up the transmitter
▷
Choose a suitable place near your sound source.
▷
Separate the transmitter from other wireless devices in the room
by at least 50 cm/20" to avoid interference.
▷
Do not place the transmitter close to metal objects such as shelf
bars, reinforced concrete walls, etc. as this can decrease the
transmitter’s range.
Connecting the transmitter to an audio
source
You can connect the transmitter either to a digital or an analog audio
source (e.g. a TV and a stereo hi-fi system).
If you connect an audio source to
both
inputs (digital and analog),
only the analog audio source will be reproduced.
▷
Switch your audio source off before connecting the transmitter.
▷
Check the connection possibilities of your audio source (audio
output, usually marked “OUT”).
▷
Select the corresponding connection cable and, if necessary, a
suitable adapter.
▷
To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the following
chapters). Follow the color codings on the transmitter and on the
cables.
You can also refer to the beginner’s video guides on how to con-
nect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos
