Sennheiser SpeechLine Скачать руководство пользователя страница 70

Страница: 70 / 214

SL Rack Receiver DW

Connecting an amplifier or mixing console to the re

ceiver

The unbalanced audio output (RCA) and the balanced audio

output (XLR) at the rear of the receiver are connected in paral

lel, allowing you to simultaneously connect two devices (e.g.

amplifier and mixing console) to the receiver.

►

Use a suitable audio cable to connect the amplifier or the mix

ing console to the appropriate audio output of the receiver.
We recommend using the balanced audio output (XLR) be

cause balanced cables are less prone to interference than un

balanced cables.

Controlling and monitoring the receiver via

the network

You can connect several receivers in a network using a router

or a switch. This allows you to control and monitor a larger

SpeechLine Digital Wireless system using the

Sennheiser

Control Cockpit

software.

For more information on controlling a system in the network

using the

Sennheiser Control Cockpit

software, refer to the

instruction manual of the software.
Please note that the host PC on which the

Sennheiser Control

Cockpit Service

is installed must be in the same network as

the devices that are to be monitored and controlled.

Содержание SpeechLine























































































































































































































Результаты поиска

Содержание SpeechLine

Отзывы:

Sennheiser SpeechLine, Руководство пользователя, Страница: 70 / 214

Результаты поиска

Содержание SpeechLine

Отзывы: