Sennheiser SpeechLine Скачать руководство пользователя страница 153

Страница: 153 / 214

The SL Boundary 114-S DW

152

Starting up and using the boundary micro

phone

Removing/inserting the BA 40 accupack

The included BA 40 accupack is used to power the boundary

microphone. The accupack must be charged before the first

use. The accupack can either be charged with the optional

CHG 2W charging base (see „The CHG 2W charging base“) or

with the supplied USB cable.
To remove the accupack:

►

▷

Pull the unlock button away from the accupack and pull the

accupack out of the compartment.

To insert the accupack:

►

▷

Slide the accupack into the compartment with the correct

orientation until the unlock button locks into place.
The charge level LEDs light up briefly and indicate the

charge level.

Содержание SpeechLine























































































































































































































Результаты поиска

Содержание SpeechLine

Отзывы:

Бренды по названию

Популярные бренды

Sennheiser SpeechLine, Руководство пользователя

Результаты поиска

Содержание SpeechLine

Отзывы:

Бренды по названию

Популярные бренды