Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 83 / 109

Using the SK 9000
82 | Digital 9000
Using the SK 9000
Switching the SK 9000 on/off
To switch the SK 9000 on :
왘
Keep the ON / OFF button
2
pressed until the Sennheiser logo
appears on the display panel
C
.
The ON LED
3
lights up and the standard display (here: “ Frequency ”,
see page 86) appears on the display panel
C
. The bodypack transmitter
transmits an RF signal and the transmission mode display “ HD ”/“ LR ”
lights up constantly:
To switch the SK 9000 off :
왘
Keep the ON / OFF button
2
pressed until the display panel goes off.
왘
Remove the accupack/battery pack when the transmitter will not be
used for extended periods of time (see page 40).
Switching on the SK 9000 on and checking the set frequency
before the RF signal is activated
왘
Switch on the SK 9000 by keeping the ON / OFF button
2
pressed
until the “ Name ” standard display appears.
The RF signal is not activated and the transmission mode display “ HD ”/
“ LR ” flashes.
If you call up the “ Tune ” or “ Preset ” menu item within the next 10 seconds,
the RF signal remains deactivated until you exit the menu item. If you do
not call up one of the mentioned menu items, the RF signal is automatically
activated after 10 seconds.
Before using your bodypack transmitter, ask the relevant wireless
regulatory authority for the exact frequency allocations and apply
for an individual license if necessary.
The supplied supplement “Framework requirements and restrictions
on frequency usage in Europe” provides an overview of the different
European framework requirements and restrictions on frequency
usage. If there is no entry in the supplement, ask the relevant wire-
less regulatory authority for the current rules governing frequency
usage.
When the SK 9000 is switched on for the first time, it contains the
first frequency preset of the transmitter frequency range (e.g. A1.1:
470.200 MHz). Via the “
ch ” menu of the EM 9046 receiver, set the
desired frequency preset and adjust the settings of other menu
items and then synchronize the transmitter and the receiver (see
page 66). In doing so, all frequency presets of the transmitter fre-
quency range will be transfered to the SK 9000.
We recommend you to always adjust the transmitter settings via
the EM 9046 receiver and then to synchronize the transmitter and
the receiver.
2
3
C
The bodypack transmitter can only be switched off when the lock
mode is deactivated (see page 83).
3:59
480.000