Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 81 / 109

Using the SKM 9000
80 | Digital 9000
“Name” – Entering a name
Via the “ Name ” menu item, you can enter a freely selectable name for the
radio microphone. The name can consist of up to 6 characters from the fol-
lowing character set:
“Gain” – Adjusting the input gain
Via the “ Gain ” menu item, you can adjust the input gain in 3 dB steps.
“Low cut” – Setting the low-cut filter
Via the “ Low cut ” menu item, you can set the low-cut filter.
Settings: “ 80 Hz ”, “ 100 Hz ”, “ 120 Hz ”.
“RF mode” - Adjusting the transmission mode
The “ RF mode ” menu item allows you to adjust the transmission mode.
Settings: “ HD ”, “ LR ”.
“Display” – Selecting a standard display
The “ Display ” menu item allows you to select one out of 3 standard
displays.
“Lock” – Activating/deactivating the lock mode
Via the “ Lock ” menu item, you can activate or deactivate the lock mode.
For more information on how to activate or deactivate the lock mode, refer
to page 77.
“Test tone” – Activating the 1 kHz test tone
Via the “ Test tone ” menu item, you can activate a 1 kHz test tone. This test
tone is transmitted instead of the input signal. You can use this function
for level matching your system or for the walk test.
“Reset” – Resetting the factory default settings
Via the “ Reset ” menu item, you can reset the radio microphone to its fac-
tory default settings.
“Information” – Displaying the firmware version and frequency
range
Via the “ Information ” menu item, you can display the firmware version
and the transmitter’s frequency range.
`+` `,` `-` `|` `/` `0` `1` `2` `3` `4` `5` `6` `7` `8` `9` `*` `;` `<` `=` `>`
`space` `#` `A` `B` `C` `D` `E` `F` `G` `H` `I` `J` `K` `L` `M` `N` `O` `P`
`Q` `R` `S` `T` `U` `V` `W` `X` `Y` `Z`
The radio microphone automatically detects the type of microphone
head being used and changes the adjustment range of the “
Gain ”
menu item accordingly.
“ Frequency ” “ Preset ” “ Name ”
3:59
480.000
480.000MHz 3:59
U
3:59
GUITAR