Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 66 / 109

Digital 9000 | 65
Using the EM 9046
“ ch ” operating mode – Configuring channels
In “ ch ” operating mode, you can configure channels. Some of the settings
that can be made can be synchronized via infra-red between the receiver
and the transmitters. These settings are marked with a in the
column (see also next page).
In “ ch ” operating mode, you can also select channels for the headphone
monitoring. To do so, proceed as described on page 74.
Overview of the “ ch ” menu
Main menu “Channel setup” Page
Frequency
Selects a frequency preset or
sets the frequency manually
67
Name Enters a channel name 68
CMD mode
Configures audio and
command outputs
68
CH standby Mutes the channels 69
Encryption
Binds the audio signal to the
receiver and protects against
eavesdropping
70
RF level rec
Records the antenna signals
and the diversity evaluation
70
Transmitter
setup Calls up the extended menu
“
Transmitter setup ”
– –
Extended menu “Transmitter setup” Page
Channel
setup Calls up the main menu
“
Channel setup ”
–
Rf mode
Adjusts the transmission
mode
72
Gain
Adjusts the transmitter’s
input gain
72
Low cut
Sets the transmitter’s
low-cut filter
72
Display
Selects the transmitter’s
standard display
73
Lock
Activates/deactivates the
transmitter’s lock mode
73
AF source Displays the microphone head
(SKM)/audio source and cable
emulation (SK) 73
Cable
Emulates different instrument
cable lengths (SK)
73