Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 58 / 109

Digital 9000 | 57
Using the EM 9046
“Network” – Configuring the network
Via the “ Network ” menu item, you can assign the receiver a network name
and select whether to obtain an IP address automatically or to enter the IP
address manually. In addition, this menu item displays the unchangeable
MAC addresses of the network interfaces of your receiver.
“Brightness” – Adjusting the brightness
Via the “ Brightness ” menu item, you can adjust the brightness in 8 steps.
This also adjusts the brightness of the LED lighting.
Extended menu “ Service setup ”
To get into the extended menu “ Service setup ”:
왘
In “ sys ” operating mode, turn the jog dial until “ Service setup ” appears.
왘
Press the jog dial.
The extended menu “
Service setup ” appears.
To change from the extended menu back to the main menu:
왘
Turn the jog dial until “ System setup ” appears.
왘
Press the jog dial.
You are back to the main menu “
System setup ” of the “ sys ” operating
mode.
Name
network
169.254.92.238
EM 9046
IPv4 address
Slot analog:
IPv4 address:
subnet mask:
gateway:
EM 9046
auto
auto
auto
192.254.95.238
255.255.0.0
0.0.0.0
LAN UP:
LAN DOWN:
00:1b:66:fe:c4:42
aa:1b:66:fe:c4:43
brightness