Sennheiser SKM 9000, Инструкция по эксплуатации

Страница: 31 / 109

Preparing the Digital 9000 system for use
30 | Digital 9000
왘
Connect the RF OUT N-type sockets of the first receiver to the RF IN
N-type sockets of an additional receiver. To do so, use the RF patch
cables from the EM 9046 CAB cable set.
왘
Repeat the previous steps for up to four receivers.
If you want to pass on word clock signals between daisy chained receivers
and/or if you want to connect daisy chained receivers in a network
(see the following chapters):
왘
Connect the receivers in the same order in which you connected the RF
N-type sockets. Always connect the network sockets from LAN DOWN to
LAN UP .
The length of the RF patch cables from the EM 9046 CAB cable set
allows a distance of 1 height unit (HU) between two EM 9046 in
a 19” rack.
EM9046
RF OUT A
RF OUT B
ANT A ANT B
RF OUT A
RF OUT B
ANT A ANT B Master PC (WSM)
RF IN A
RF IN B
RF IN A
RF IN B
RF OUT A
RF OUT B
RF IN A
RF IN B
RF OUT A
RF OUT B
WORD
CLOCK
OUT IN
WORD
CLOCK
OUT IN
WORD
CLOCK
OUT IN
LAN UP
LAN DOWN
LAN UP
LAN DOWN
LAN UP
LAN DOWN