Sennheiser SKM 300 G3, Инструкция по эксплуатации

Страница: 27 / 39

26 | SKM 300 G3
Adjusting settings via the operating menu
For information on how to use the MIC button, refer to
page 15.
Adjusting the backlighting of the MIC button –
“MIC LED”
Via the “ MIC LED ” menu item, you can adjust the
backlighting of the MIC button
3
based on the setting
of the “ Mute Mode ” menu item and the status of the RF
signal or deactivate the backlighting.
Adjusting the transmission power – “RF Power”
Via the “ RF Power ” menu item, you can adjust the
transmission power in two steps. It is vital to observe
the notes on the supplied frequency information sheet!
Mode Function
“ AF On/Off ” If you press the MIC button, the
audio signal is muted.
“ RF On/Off ” If you press the MIC button, the
RF signal is deactivated.
“ Push To Mute ” The audio signal is muted as long
as you press the
MIC button.
“ Push To Talk ”
*
*
If you select “ Push To Talk ”, the radio microphone will be
permanently muted until you press the MIC button.
The audio signal is activated as
long as you press the
MIC button.
“ Disabled ” No function
Setting of the
MIC LED menu item Backlighting of the MIC button
3
LED On: Unmute The MIC button
3
is backlit
when the radio microphone is
transmitting an RF signal or is
not muted.
LED ON: Mute The MIC button
3
is backlit when
the radio microphone is not
transmitting an RF signal or is
muted.
Disable LED The backlighting of the
MIC button
3
is deactivated.
Call up “MIC LED” Select the desired
setting
Advanced Menu
MIC LED
LED On: Unmute
LED On: Unmute
MIC LED
Store the setting
MIC LED
“Stored”
LED On: Mute
Call up
“RF Power” Select the desired
setting Store the setting
Advanced Menu
RF Power Standard
Standard
RF Power
Low
RF Power
“Stored”