Sennheiser SKM 300 G3, Инструкция по эксплуатации

Страница: 24 / 39

SKM 300 G3 | 23
Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel
manually – “Frequency Preset”
Overview of the frequency banks and channels:
e:
Entering a name – “Name”
Via the “ Name ” menu item, you can enter a freely
selectable name for the radio microphone.
The name can be displayed on the “ Frequency/Name ”
and “ Name/Channel ” standard displays and can consist
of up to 8 characters such as:
• letters (without pronounciation marks),
Transmission situation Sensitivity setting
Loud music/vocals
−
48 to
−
18 dB
Presentations
−
18 to
−
12 dB
Interviews
−
12 to 0 dB
When you are in the “ Frequency Preset ” menu
item, the RF signal is deactivated.
Frequency bank Channels Type
“ 1 ” to “ 20 ” up to 24 per
frequency
bank System bank:
frequencies are
factory-preset
“ U1 ” to “ U6 ” up to 24 per
frequency
bank User bank:
frequencies are
freely selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset transmission frequencies
within one frequency bank are intermodulation-
free (see page 29).
Radio microphone and receiver of a transmission
link have to be set to the same frequency.
Pay special attention to the notes on frequency
selection on page 29.
Menu
B.Ch: 1. 1
Frequency Preset B.Ch:
MHz
Frequency Preset
1 . 1 B.Ch:
MHz
Frequency Preset
1. 1
Call up “Frequency
Preset” Select the frequency
bank and confirm Select the channel;
store the setting
“Stored”
806.125 806.125
Call up “Name” Enter a character
and confirm Enter a character;
store the setting
Menu
L i c h a e l
Name
Name Name
L i c h a e l M i chael
“Stored”