Making calls using the headset
SD Series - User Guide
| 27
Holding a conference call
The headset system allows you to hold a conference call with up to
4 SD series headsets. The first headset paired (master) is used to control
the call establishment and end of conversation.
Pairing the master headset with the base station
왘
Place the master headset into the base station and wait until the
headset LED lights up blue. Take the headset out of the base station
and press the Link button to pair the headset with the base station. The
Link LED
on the base station lights up blue.
Adding a guest headset to a conference call
왘
Place the guest headset into the base station of the master headset.
The Headset LED alternately flashes blue/red until a link to the base
station is established. The Headset LED flashes 3 times blue.
왘
Take the guest headset out of the base station. You hear a beep in the
master headset.
왘
To add the guest headset to the conference call, press the Link button
on the master headset within 15 seconds.
왘
Repeat this procedure to add additional guest headsets to the confer-
ence call.
왘
Call the other party.
Dropping a guest headset from the conference call
왘
Press the Link button on the guest headset. The guest headset is
dropped from the conference call.
Ending a conference call
왘
Use the master headset to end the conference call or to disconnect the
link to the base station. The guest headsets are automatically dropped
from the conference call.
MASTER
GUEST
GUEST
GUEST
SD Office – HS
SD Pro1 – HS
SD Pro2 – HS
MASTER
GUEST
GUEST
GUEST
To subsequently use the guest headset with other base stations,
place the guest headsets into the other base stations. The Head-
set LED alternately flashes blue/red until a link is established.
