Sennheiser RS 4200 II -, Инструкция по эксплуатации

Страница: 13 / 23

Putting the system into operation
RS 4200 II | 9
Connecting the transmitter via the SCART socket
If your sound source has a SCART socket, you can order the
suitable SCART adapter from your Sennheiser dealer.
왘
Connect the connection cable
E
to the SCART
adapter
H
.
왘
Plug in the SCART adapter
H
to the SCART socket on
your TV. If your TV has several SCART sockets, select a
SCART socket that is also an output (for details, see
operating manual of your TV).
Using an external microphone
If your sound source doesn’t have a headphone or audio
output, SCART or RCA socket, you can use your RS 4200 II
together with an external microphone (optional acces-
sory).
왘
Connect the microphone to the blue socket AUDIO
5
on
the transmitter.
왘
Position the microphone in front of the loudspeaker of
your sound source. You can change the sound by
varying the position of the microphone in front of the
loudspeaker.
Connecting the transmitter to the mains
왘
Connect the mains unit to the yellow socket (9 V
DC
)
7
on the transmitter.
왘
Plug the mains connector into a wall socket.
왘
Align the antenna
9
vertically.
C
H
E
D
7
9
When not using the transmitter for extended periods
of time (e.g. when you are on holiday), pull out the
mains connector from the wall socket. In this case,
however, the receiver’s rechargeable battery will not
be recharged.