16 |
HD 4.50BTNC/HD 4.50R
Getting started
Pairing the headphones with a Bluetooth device
Ensure that the headphones are within the 20 cm range of your smartphone
when performing this procedure.
1.
Switch the headphones on (see page 19).
– If you pair the headphones to the device for the first time, they automatically
go to pairing mode.
– If the headphones don’t automatically go to pairing mode, switch the
headphones off and press the power button again for 4 seconds or until
you hear the voice prompt
“power on”
and a beep sound.
The LED flashes blue and red. The headphones are in pairing mode.
2.
Activate
Bluetooth
on your smartphone.
3.
On your smartphone, start a search for
Bluetooth
devices.
All active
Bluetooth
devices in the proximity of your smartphone are
displayed.
4.
From the list of found
Bluetooth
devices, select
“HD 4.50BTNC”/ “HD 4.50R”
.
If necessary, enter the default PIN code “0000”.
If pairing was successful, you hear the voice prompt
“connected”
. The LED
flashes blue 3 times.
Menu
Add Device
Menu
Bluetooth on
Bluetooth off
20 cm
1s
1s
› power on ‹
2s
HD 4.50BTNC / HD 4.50R
HD 4.50BTNC / HD 4.50R
Keyword: 0000
1
2
3
4
› connected ‹
