Sennheiser EM 3731-II - ANNEXE 583, Инструкция по эксплуатации

Страница: 37 / 50

Adjustment tips for the operating menu
36
Scanning the frequency banks for interference-free channels
Via the “ Scan ” menu, you can scan all frequency banks for free channels.
왘
Change to the setting mode of the “ Scan ” menu.
The following selection appears:
– “ Channel list ”
displays the number of free channels for each frequency bank from
the last scan.
– „ Scan new ”
scans all frequency banks and displays the number of free channels
for each frequency bank.
– „ Scan reset ”
releases channels that were occupied or subject to interference
during the last scan (these channels a marked with a warning
triangle and “
Freq. occupied ”.
Displaying a list of all free channels
Via the “ Channel list ” menu, you can display the last scan result. You can
then select a suitable frequency bank and a channel.
왘
Turn the jog dial
7
until the arrow points to “ Channel list ”.
왘
Press the jog dial
7
.
A table displays the number of free channels for each of the seven
frequency banks.
왘
Turn the jog dial
7
to select a frequency bank with a sufficient number
of free channels.
왘
Press the save button
8
.
The selected frequency bank is automatically called up in the “ Bank.Ch ”
menu.
왘
Select a channel from this frequency bank (see “Selecting a frequency
bank and a channel” on page 30).
Scan Displa
1
Channel list
Scan new
Scan reset
B.Ch
1 .
776.000
MHz
Freq. occupied
Channel list
Scan new
Scan reset
Bank 4 5 6 U
Free 32 31 33 60
Bank 1 2 3
Free 43 40 42
esc
s ave
syn c
digital audio
processing
syn c
DEV
M
H
z
777.005
U.01 BANK
CH
COM
AF
8 7
B.Ch
1 .
776.000
MHz
Freq. occupied
After the scan, the channels that are occupied or subject to
interference are marked with a warning triangle and “
Freq.
occupied ”.