Putting the receiver into operation
13
Connecting the mains cable
왘
Pass the mains cable through the cable grip
.
왘
Connect the mains cable to the mains socket
.
왘
Plug the mains plug into the wall socket.
The
STANDBY
button
is backlit in red.
CAUTION!
Damage due to electric current!
If you connect the receiver to an unsuitable power supply, this can cause damage to the
device.
왘
Use the supplied mains cable to connect the receiver to the mains (100 to 240 V AC, 50 or
60 Hz).
왘
Ensure a reliable mains ground connection of the receiver – especially when you are using
multi-outlet power strips or extension cables.
50/60Hz 0.25A
100 - 240V
쐎
쐅
Содержание EM 2000
Страница 42: ...Manufacturer Declarations 41 ...