Using the SKM 100 G4
80
Deactivating the RF signal (RF mute)
You can temporarily deactivate the RF signal when the microphone is
switched on. When the RF signal is deactivated, no audio signal is output.
Use this function to save battery or when you want to prepare a micro-
phone for use during live broadcast without interfering with the current
transmission path.
To
deactivate
the
RF signal
:
▷
Short-press the
ON/OFF
button.
RF Mute On?
appears.
▷
Press the
SET
button.
The transmission frequency is displayed, however the wireless micro-
phone is not transmitting an RF signal. The transmission icon is not lit
(see “Displays on the SKM 100 G4 handheld transmitter display pan-
el”).
To
activate
the
RF signal
:
▷
Short-press the
ON/OFF
button.
RF Mute Off?
appears.
▷
Press the
SET
button.
The transmission icon appears again (see “Displays on the SKM 100 G4
handheld transmitter display panel”).
►
Содержание EM 100 G4
