40
6.1 Powering On the inverter
Step 1
Switch ON the AC circuit breaker.
Step 2
Set the DC SWITCH of the inverter to ON.
Step 3
Observe statuses of LED indicator lights on the inverter according to Table 7.1.
NOTE
If the LED enters in grid-tied status, it means the inverter is operating
successfully. If there is any abnormal situation, contact customer service
center of Senergy timely.
6.2 Powering Off the inverter
Step 1
Run a shutdown command on the inverter APP, SE Touch.
Step 2
Switch off the AC circuit breaker.
Step 3
Set the DC SWITCH to OFF.
WARNING
After the
inverter
powers off, the remaining electricity and heat may
still cause electrical shock and burns. Therefore, only begin servicing
the
inverter
ten minutes after the power-off.
7. User Interface
7.1
Checking inverter operation status
inverter operation status can be obtained from observing LED indicator status. For more
details, refer to Table 7.1 LED Indicator status.
Table 7.1
LED Indicator status
Indicator
Status
Meaning
