Senect O2S-20-SC, Руководство пользователя

Страница: 5 / 24

General Security Notes
5
General Security Notes
The oxygen sensor O2S is an electronic unit for the
measurement of the concentration of dissolved oxygen in
water and must be used in combination with SENECT control
units.
Since it is an electronic product the common prerequisites
for a safe instrument usage must be fulfilled. The
corresponding control unit must be operatated
with 230 V AC (~50 Hz). Ensure that all cables are
installed safely so that no obstacles for persons are
built and all. Mount all cables and electric devices
protected against direct environmental impacts
like overheating by direct sunlight and water.
Even if the products are protected against spray
water, the product´s lifetime will be elongated, if it is
mounted on a protected place. The oxygen sensor O2S uses
24 V DC supply voltage which is therefore not of danger for
persons.
For many applications a ground fault circuit interruper
(interrupting current <= 30 mA) is required by law. Inform
yourself about the valid legislation.