Seneca S6001-RTU, Руководство пользователя

Страница: 164 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
164
18.1.19.4 Adding a M-BUS Device
1. Go to M-BUS Scan and make a Secondary or Primary Scan
2. Take note of the new address and baudrate
3. Go to M-BUS Configuration and manually add the address and baudrate of the new device with
the “ADD” button
4. Push the “Create Tag” button
5. Import the shared memory file (see chapter 18.1.19.1)
6. Import the variable file (see chapter 18.1.19.1) without delete your local variable (use copy-
paste)
18.1.19.5 Delete a M-BUS Device
1. Go to M-BUS Scan and make a Secondary or Primary Scan
2. Take note of the Device address to delete
3. Go to M-BUS Configuration and manually delete the device with the “DELETE” button
4. Push the “Create Tag” button
5. Import the shared memory file (see chapter 18.1.19.1)
6. Delete the variables from the deleted device
18.1.19.6 Tag error report
When variable tags are imported in Straton a special tag is creted “Tag error report”.
Use this tag for monitoring the device communication errors:
ERORR REPORT VALUE MEANING
0 READ OK
-2 READ TIMEOUT, NO
RESPONSE FROM DEVICE
18.1.20 Data Logs
By clicking on the “Logs” link, in the “Data Logger” menu, you come to a page similar to those in the
following figures: