SDI2X
– User Manual
Page 34 (61)
IGMP Filter Mode
Include
Exclude
Used on networks supporting IGMPv3. If this
setting is set to
Exclude
any streams
originating from the user defined IP addresses
will be rejected. If this setting is set to
Include
any streams originating from the user defined
IP addresses will be received.
IGMP Filter
Address List
0.0.0.0
–
255.255.255.255
User entered IGMP addresses are displayed
and managed (added, removed) within this
section of the configuration window.
5.2 Admin Control Panel
To access the Admin Control Panel, click on the Admin tab. This page will offer the user
to control many global settings and maintenance tasks on the SDI2X.
5.2.1
Changing Unit Password
The configuration button for this feature will be found under the Admin Control Panel
title ribbon.
This feature provides the SDI2X user management control of the web interface access
password.
In order to make changes to passwords, click the change password button.
A window will appear to enter the current password and new password.
Click “Apply”
to save and exit.
5.2.2
Profiles