SDI2X
– User Manual
Page 12 (61)
1.3 Rear Panel Overview
The SDI2X comes standard with all of the hardware listed below except where noted as
a factory installed option. back panel will provide the user with the following
connections:
1. RJ45 Management Port
2. Unit Identification LED
3. Four 3G/HD/SD-SDI Bi-directional ports
4. HDMI Output
5. Data Path 1: One of two SFP ports for SMPTE 2022-6/2110 uncompressed video
over IP
6. Data Path 2: One of two SFP ports for SMPTE 2-22-6/2110 uncompressed video
over IP
Sencore offers three (3) optional SFP adaptors that will allow the user the following
port configurations
10G Fiber
(Sencore part SDI2X-10G-SFP-FIBER)
1G Fiber
(Sencore part SDI2X-1G-SFP-FIBER)
1G RJ45 Copper
(Sencore part SDI2X-RJ45-COPPER)
1.4 Cooling
The SSDI2X is cooled via forced induction through the front of the unit and exhausted
through the vents in the rear. The unit is equipped with a internal temperature sensor.
If the internal temperature exceeds 60°C the
“Error” LED will illuminate on the front
panel and an error message
will appear in the “Error List.”
2
1
3
5
4
Z
6