OmniHub 16 – User Manual
Page
85
of
112
•
Click the “+” icon of Descriptor and add the LCN Descriptor. Then check all the
programs which are contained in this frequency. Then set program LCN.
•
Do same operations to add next TS (frequency) until NIT streams of all the
frequencies have been included. Lastly click Apply button to let all configuration
take effect. Then searching programs in your STB, you will get all programs in
order of LCN which you set.
Function Modules
3.3.20
OHP-EAS
The OHP-EAS-00 module provides the ability to interrupt Encoder playback and switch
to an external transport stream. This feature is for the US market and requires the
OmniHub chassis to be set for ATSC standard. A common application of Emergency
Alert Systems is for Broadcast and Audio Muting.
The trigger switched video content on the Encoders can be sensed using a DC contact
closure or the SCTE-18 EAS standard over ASI/IP when the EAS is “Paved” or actively
replacing the encoder outputs.
