OmniHub 16 – User Manual
Page
69
of
112
•
Destination IP Address
and
Destination Port:
for multicast IP addresses or
unicast IP addresses and ports.
•
Enable Destination MAC:
Generally, you do not need to enable this option. This
is reserved for exceptional cases when the unicast stream cannot be received by
with the unicast IP addresses. You can enable destination MAC and streaming
out by setting Destination MAC.
The second eth is reserved to output IP streams in an another different VLAN. Enabling
the second eth and set
IP Address
,
Subnet Mask
,
Default Gateway
in the same
segment of the Unicast IP (the another different VLAN), you can output the Unicast
stream to the another VLAN.
To use
Multiplexing mode on service level
:
1. Click on
(pencil) icon. There will always be a BaseBoard selection for the IP
output and other Output options depending on the module inserted.
2. Select the correct Output and Channel you want to output the service to.
3. Check Multiplex on the channel you want to outputt. You can output multiple
services to one channel or output one service to multiple channels.
3.3.12
OHE-CVBS-00/R01/R01A
OHE-CVBS-00/R01/R01A
is a 6/8/16-channel CVBS encoder with 2/2/4 DB15
connectors (for 3/4/4-channel respectively). It supports H.264/MPEG-2 SD encoding and
MPEG1-L2, AAC (optional) and AC3 (optional) audio. One difference of the two modules
is, OHE-CVBS-R01 has insertion features while OHE-CVBS-00 doesn’t have.
OHE-CVBS-00/R01 (6/8 CH)
