OmniHub 16 – User Manual
Page
19
of
112
3.1 OmniHub 16 Web Interface Overview
3.1.1
Connecting to the Management Port
OmniHub 16 has an embedded 4 ports gigabit switch. The four network ports are
respectively used for managing and data reception/streaming. From left to right, port 1
and 2 are used for management and, port 3 and 4 are used for IP reception or streaming.
If an external IP switch needs to be installed between OmniHub 16 and other headend
devices, this switch should support IGMP V2 and IGMP snooping function.
3.1.2
Logging into the OmniHub 16 Web Interface
To open the OmniHub 16 web interface use one of the following supported browsers and
navigate to the unit’s IP address:
•
Firefox
•
Google Chrome
Factory network settings of the Management Port:
•
IP address:
192.168.1.10
•
Subnet Mask: 255.255.255.0
•
Gateway:
192.168.1.254
The user will need to login to the web interface. The default
username
/
password
are
admin/admin.
Click the login button to login to the web interface.
3.2 Status Overview
After a successful login, a welcome screen is displayed. The welcome screen allows you
to navigate to:
1. Module List shows the module (s) installed inside the chassis
2. Settings buttons shows status, system settings, IP inputs, IP outputs, admin
3. Device host operation status
