Page | 61
The alternative modes are simply Input or Output.
10.2 ASI
– Input flow configuration
The configuration of an ASI input card is simply to enable / disable a port and configure the analysis mode to be MPEG or DVB.
Once a port is enabled the system will start to analyze the input PSI accordingly.
10.3 ASI - Output flow configuration
The configuration of the ASI output is essentially to add define the attributes of the ASI port, and then to add services to the port
itself. Please refer to the IP output application description for an explanation on how to add content to an output.
10.4 ASI output port settings
For each ASI output port the following parameters must be set.
