Page | 35
Label
A user defined label of the AC group.
Mode
Select ECM or fixed-key scrambling.
ECMG
Select an ECMG from a list defined in the Conditional Access application.
Preferred
PID
(Optional) Define the ECM packet identifier.
CP duration
(Optional) Define minimum crypto period in seconds. Minimum value is 5 seconds.
AC type
Select the AC type, HEX or 32-bit INT.
Access
Criteria
An ID used by the CA system to manage access rights for the services in the AC
group.
Private Data
User defined HEX data added to the CA descriptor in the PSI.
7.4.2 Edit Access Control group
Click on a defined AC group to enable the edit pane on the right-hand side. All the parameters that was defined when the
AC group was created can be edited in this view.
Click the save button on the bottom of the centre window to apply changes.
7.4.3 Edit service
Expand the AC group in the overview window and click on a service. An edit pane on the right-hand side appears with
service specific settings.
Changes are applied after clicking the save button on the bottom of the centre window.
