Page | 33
Label
A user defined label of the EMM generator.
EMM
Generator
Select a generator defined on the “EMM Generators” tab.
EMM stream
ID
An ID defined by the EMM server that identifies the stream.
Max bitrate
The maximum bitrate for the EMM stream.
CAT private
data
(Optional) User defined HEX string inserted in the private data section of the CAT
table.
PID
(Optional) The EMM packet identifier.
7.4 Flow Scrambling Application
The flow scrambling start page shows a list of all defined access control groups. An access control group is a group of
services that share the same ECMGs and Access Criteria.
To add new groups or services, expand the left window pane. To edit an existing group or service, select it in the center
pane, such that the edit pane appears on the right-hand side.
A
special access control group named “Clear group” is predefined. No scrambling will be applied to services in this group
and no ECMs will be generated. This group can be useful during initial setup to test service routing before enabling
scrambling. When using EIS this group is a holding area for services that are not configured with scrambling.
