Page | 32
Connection
Select connection type to the EMM server. TCP, UDP or TCP/UDP. With TCP/UDP
the initial setup uses TCP while data transfer is using UDP as defined by the
Simulcrypt standard.
TCP port
The local TCP port of the module to which the server can connect.
CA system
ID
The CA system ID allocated by DVB to identify copy protection systems.
CA
subsystem
ID
An identifier per connection in redundancy mode where there is multiple connection
to an EMMG with the same CA system ID.
Remote IP
Enter the EMM server’s IP address. Click the green “plus” button to add more
server IP addresses for redundancy.
7.3 EMM Streams
Label
A user defined label of the EMM generator.
UDP port
Local UDP port of the module used by the EMMG. Defined only if the EMMG is in
UDP or TCP/UDP mode.
RX bytes
Accumulated byte counter for received data.
7.3.1 Add a new EMM stream
