Quick Installation Guide
CAP2100AG
Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual
Concurrent AP
Please verify contents of the box before continuing to set up the CAP2100AG.
CAP2100AG Access Point
12V/2A 100V~240V Power Adaptor
RJ-45 Ethernet Cable
Mounting Bracket
Wall/Ceiling Mounting Hardware Kit
T-Rail Mounting Hardware Kit
CD with User's Manual
Connecting the CAP2100AG
1)
Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information,
verify with User Manual.
2)
Connect one end of the Category 5e Ethernet cable into RJ-45 port of the CAP2100AG and the
other end to the RJ-45 port on the computer that will use the CAP2100AG. Ensure that the cable
is securely connected to both the CAP2100AG and the Computer.
3)
Connect the Power DC Inlet to the
DC-IN
port of the CAP2100AG and the Power to the electrical
out.
Note
: CAP2100AG supports both IEEE 802.3at PoE(Power over Ethernet) and regular power adapter. You
should use either one as the power source. Please do not apply both at the same time.
