AFTER SALES SUPPORT
GB
IRE
00800-98887000
Installing/setting up the clock
GB
IRE
15
• The suction cups only stick to smooth surfaces.
•
From time to time, fix the clock again and check
how secure it is as the suction cups may come
loose after a while.
• Do not mount the clock in the shower area as the
clock is only protected against moisture. Excessive
exposure to water could cause it to malfunction.
• Do not pull directly on the clock to loosen it. This will
avoid defects affecting the device or the surface.
The clock’s suction cups are suitable for attachment to
smooth surfaces, e.g. tiles (the tiles must be glossy, the
suction cups will not stick to mat tiles), mirrors and glass
surfaces etc.
− Wet the suction cups somewhat before pressing
them into place to ensure they are firmly attached.
Removing the suction cups
− Lift up the edge of the suction cups
3
one by one to
let air in (see
fig. A
).
You can now take the suction cups off of the surface.
Mounting the clock with the hanging
loop
If you are unable to mount the clock with suction cups,
you can use the hanging loop
2
on the back of the
cover (see
fig. A
).
− Hang the clock on a nail or a screw in a suitable loca-
tion on the wall.
