SEMIKRON L5064101, Техническое описание

Страница: 9 / 20

Technical Explanation
SKiiP
®
3 Parallel Board
© by SEMIKRON 2017-08-30
– Rev02
9 / 20
6 Pin Description
6.1
Pin assignment of Controller Connector X1
The Parallel board is equipped with a 14-pin DIN connector. Please refer to the Technical Explanation SKiiP
®
3
Rev.2 for more detailed information.
Figure 7: PCB Connector for the controller
Table 1: Controller connector X1 pin assignment
Pin Signal name Function Specification
1 Shield Shielding

For shielded cable
2 BOT IN PWM signal input for low side IGBTs

Input

+15V/0V-Logic

10k
Ω impedance
3 ERROR OUT Common error status signal output

Open collector output

LOW = no error

Max. 30V/15mA
4 TOP IN PWM signal input for high side IGBTs

Input

+15V/0V-Logic

10k
Ω impedance
5
Temp. ERROR
OUT
Common over-temperature error signal
output

Open collector output

LOW = no error

Max. 30V/15mA
6 N. C. Not used
7 N. C. Not used
8
+15V
Supply voltage output for optional level
shifter or F-Option

+15V ±4%

Max. output current: 100mA
9
10
GND Power supply ground
11
12 TEMP_ANA
Temperature measurement analogue
signal output (maximum SKiiP
temperature)

Output voltage range:
0…+10V

Max. output current: 5mA
13 GND_ANA Ground for analogue signals
14 I_ANA
Current measurement analogue signal
output (sum of AC-currents)

Output voltage range:
-
10V…+10V

Max. output current: 5mA
6.2
Pin assignment of SKiiP
®
3 Connectors (X3, X4, X5, X6).
Please refer to the Technical Explanation SKiiP
®
3 Rev.2 for pin assignment of the connectors X3, X4, X5, X6.