Assemble the Carcass:
Identify the two gables.
Each gable has two locating holes
drilled on the top forward face: this
will allow you to align the lift mecha-
nism locating lugs before screw fixing
to the gable.
3
Identify the back:
insert dowels into the holes—then
join this back with one of the gables… Be sure to secure
this join by inserting screws in the small holes from the
outside.
4
Now place carcass on end.
Insert dowels into the top &
bottom … and insert these into the gable.
Aventos Lift UP:
With AVENTOS HK, each door swings up
and stays out of the way no matter where stopped. Be-
cause of its unique opening action, it is ideal for all sorts of
design applications and cabinets ...
AVENTOS HK components
are easy to assemble. Once
the lift mechanism has been
precisely adjusted to the
weight and size of the front,
AVENTOS HK will open, close
and hold with reliable ease.
You are now ready to assemble
the LIFT mechanism:
…..
Open the Aventos Hardware boxes and identify the 2 x
Door Mounting plates. These can be screwed to the door by pressing in
securely and then screwing the four screws down firmly with a cordless
drill. For now place the door to one side.
1
The top & bottom of your carcass are dowelled into the back &
the gable so ensure these are correctly located.
5
Almost there:
place the last gable on to the carcass en-
suring the dowels are aligned. Then secure with screws in
the remaining holes.
AVS:
Aventos HK Lift-up Cabinet (800mm)
2
Standard throughout the Semble
range is the 3-hole adjustable shelf
allowing fine adjustment to maximize
your storage / display options.
6
