SELVA MARINE Kingfish 25, Руководство по обслуживанию

Страница: 201 / 398

7-53
POWR
Power unit
Installing the exhaust cover
Do not reuse a gasket or O-ring, always
replace it with a new one.
1. Install the dowels
1
, a new gasket
2
,
the exhaust cover
3
, the thermostat
4
,
a new gasket
5
, and the thermostat
cover
6
, and then tighten the bolts
7
to
the specified torques in 2 stages and in
the order
1
,
2
, and so on.
2. Install a new O-ring
8
and the exhaust
cover anode
9
to the anode plug
0
, and
then tighten the screw A to the specified
torque.
3. Install new gaskets
B
and
C
, and then
tighten the anode plug
0
and plugs
D
and
E
to the specified torques.
Thermo sensor
2
:
23 N·m (2.3 kgf·m, 17.0 ft·lb)
1
2
7
3
2
1
6
4 5
7
&
(
!
$
%
#
±
²
Exhaust cover and thermostat cover bolt
7
:
1st: 6 N·m (0.6 kgf·m, 4.4 ft·lb)
2nd: 12 N·m (1.2 kgf·m, 8.9 ft·lb)
Exhaust cover anode plug 0 :
18 N·m (1.8 kgf·m, 13.3 ft·lb)
Exhaust cover anode screw A :
2 N·m (0.2 kgf·m, 1.5 ft·lb)
Exhaust cover plug D (M14):
23 N·m (2.3 kgf·m, 17.0 ft·lb)
Exhaust cover plug E (M18):
55 N·m (5.5 kgf·m, 40.6 ft·lb)
B
D
0
D
B
C E
9
8
A
A A
1377B